Virtual Cockpit Instrument RS6 GT Runway layout 4K0920790 For Audi A6 S6 RS6 A7 S7 RS7 Q7 SQ7 Q8 RSQ8

Fit Car Model:

For 2019-2025 Audi A6 S6 RS6
For 2018-2025 Audi A7 S7 RS7
For 2021-2025 Audi Q7 SQ7
For 2019-2025 Audi Q8 RSQ8

Brand new 0KM!!

MIB3 A6L C8， A7  4K ，Q7 4MPA， Q8 4M

Package Contents:

1 * Combi-Instrument

Note1:

2019-2020 A6, A7, Q7, Q8 MIB2P upgrade MIB3 runway layout Virtual cockpit

1.Component protection is required
2. Since the virtual cockpit with runway layout belongs to the MIB3 platform, installing the MIB3 virtual cockpit on the MIB2P platform will not display navigation and entertainment information. Therefore, data must be flashed on the J794 dashboard. As a result, there are additional costs for component protection and flashing the dashboard.
3. If you want to switch the runway layout (the MIB2P navigation display screen cannot directly switch the layout), it is necessary to install a rainbow display module and then switch the layout through the multi-functional button

 2021 to 2025, the A6, A7, Q7, Q8 MIB3 platforms can directly replace the virtual cockpit with a new runway layout. We can call up the runway layout and RS layout before shipment

Note2:

1.The delivered hardware has been functionally tested!
2.Installation instructions can be provided during installation, and the vehicle needs to be coded after installation.
3.Please contact your Volkswagen Audi dealer or modder to provide ODIS,5054A, 6154A, DOIP devices and diagnostic software.

Technical specifications:

Volkswagen and Audi Parts Protection and Coding Notice:
For some Volkswagen and Audi control modules, component protection (CP) and coding need to be removed after installation.
Removing component protection (CP) and encoding involves advanced online authorization and firmware /EEPROM write procedures, which must be performed using the official factory diagnostic system.

By purchasing this product, the customer explicitly acknowledges and agrees:

1. Removing component protection (CP) and encoding poses irreversible risks.
2. Incorrect programs, software mismatch, unstable voltage, session interruption or unauthorized tools may all cause the module to fail to be recognized, resulting in communication interruption or the module being unusable.
3. The Seller shall not be held responsible for any damage, malfunction, loss of communication or failure resulting from the removal of component protection (CP), coding, programming or vehicle system adaptation by the customer or any third party (including Audi dealers, workshops, modifiers or mechanics).
4. Any malfunction that occurs after the removal of component protection (CP) and coding is regarded as third-party technical damage after delivery and does not constitute a manufacturing defect. It does not meet the conditions for return, refund or replacement.
5. Special Note: If the customer requests the seller to remotely flash data and code for product coding and to remove component protection, please contact in advance. The remote cost will be calculated separately (the seller is responsible for any damage caused by this remote flashing of data and code).