Surround view 360 Kit 4 camera Environment view system For Audi A4 S4 A5 S5 RS5

Fit Car Model：

A4 S4 RS4 (2016-2024)

A5 S5 RS5 (2017-2024)

Package Contents:

control unit
4 * Camera
Front view bracket
Rear view bracket
Supporting panoramic bottom shell and bracket（Matte）
Cable set

Function:

By using four cameras (front view, left and right rearview mirrors, rear view), one can have a comprehensive understanding of the surrounding environment.
The camera provides various real-time views of the vehicle environment and can rotate and zoom in and out of the external view of the virtual vehicle on the touch screen of the multimedia interactive system
Aerial view enables better vehicle handling and positioning
Rear view camera view with auxiliary components for lateral parking or trailer operation
Front camera view with guide rail and obstacle view in front of the vehicle
Front and rear wheel views provide better visibility when approaching the curb, and support a nearly 180 degree panoramic view when leaving narrow parking spaces, lanes, or intersections

Note:

1.The delivered hardware has been functionally tested!
2.Installation instructions can be provided during installation, and the vehicle needs to be coded after installation.
3.Please contact your Volkswagen Audi dealer or modder to provide ODIS,5054A, 6154A, DOIP devices and diagnostic software.

Technical specifications:

Volkswagen and Audi Parts Protection and Coding Notice:
For some Volkswagen and Audi control modules, component protection (CP) and coding need to be removed after installation.
Removing component protection (CP) and encoding involves advanced online authorization and firmware /EEPROM write procedures, which must be performed using the official factory diagnostic system.

By purchasing this product, the customer explicitly acknowledges and agrees:

1. Removing component protection (CP) and encoding poses irreversible risks.
2. Incorrect programs, software mismatch, unstable voltage, session interruption or unauthorized tools may all cause the module to fail to be recognized, resulting in communication interruption or the module being unusable.
3. The Seller shall not be held responsible for any damage, malfunction, loss of communication or failure resulting from the removal of component protection (CP), coding, programming or vehicle system adaptation by the customer or any third party (including Audi dealers, workshops, modifiers or mechanics).
4. Any malfunction that occurs after the removal of component protection (CP) and coding is regarded as third-party technical damage after delivery and does not constitute a manufacturing defect. It does not meet the conditions for return, refund or replacement.
5. Special Note: If the customer requests the seller to remotely flash data and code for product coding and to remove component protection, please contact in advance. The remote cost will be calculated separately (the seller is responsible for any damage caused by this remote flashing of data and code).