Virtual cockpit with tachometer Layout and Runway Layout 4N0920790 for Audi A8 S8 D5

Fit Car Model:

For 2019-2025  Audi A8 S8 D5

Brand new 0KM!!

Note1:

1.

Replacing the virtual cockpit cluster with a new one requires protecting and coding the components

2,
Due to the fact that the virtual cockpit with RS GT tachometer layout and runway layout belongs to the MIB3 platform,

the virtual cockpit installed on the 2021-2025 MIB3 platform on the 2019-2020 MIB2P platform will not display navigation and entertainment information.

If you want to display navigation and entertainment information in the cluster,

you must apply data patches on the J794 dashboard of the MIB2P platform. Therefore, component protection and flashing dashboard require additional costs.

MIB2P（2019-2020 A8 S8）

3,

The 2019- 2024 navigation display screen will not display the RS GT tachometer layout .
The 2019-2020 navigation display screen will not show the runway layout.
If you want to switch between RS GT tachometer layout and runway layout (MIB2P navigation display cannot directly switch layouts), you need to install a rainbow display module and then switch layouts through the multifunction button.

4. When installing the dashboard, please keep the mileage at 0 kilometers to prevent the mileage from being unable to be changed after the dashboard is locked.

Note2:

1.The delivered hardware has been functionally tested!
2.Installation instructions can be provided during installation, and the vehicle needs to be coded after installation.
3.Please contact your Volkswagen Audi dealer or modder to provide ODIS,5054A, 6154A, DOIP devices and diagnostic software.

Technical specifications:

Volkswagen and Audi Parts Protection and Coding Notice:
For some Volkswagen and Audi control modules, component protection (CP) and coding need to be removed after installation.
Removing component protection (CP) and encoding involves advanced online authorization and firmware /EEPROM write procedures, which must be performed using the official factory diagnostic system.

By purchasing this product, the customer explicitly acknowledges and agrees:

1. Removing component protection (CP) and encoding poses irreversible risks.
2. Incorrect programs, software mismatch, unstable voltage, session interruption or unauthorized tools may all cause the module to fail to be recognized, resulting in communication interruption or the module being unusable.
3. The Seller shall not be held responsible for any damage, malfunction, loss of communication or failure resulting from the removal of component protection (CP), coding, programming or vehicle system adaptation by the customer or any third party (including Audi dealers, workshops, modifiers or mechanics).
4. Any malfunction that occurs after the removal of component protection (CP) and coding is regarded as third-party technical damage after delivery and does not constitute a manufacturing defect. It does not meet the conditions for return, refund or replacement.
5. Special Note: If the customer requests the seller to remotely flash data and code for product coding and to remove component protection, please contact in advance. The remote cost will be calculated separately (the seller is responsible for any damage caused by this remote flashing of data and code).