AUDI A3 8V A4 B9 A5 F5 Q5 FY Q7 4M TT 8S Active Sport Layout

1:  Preliminary preparation:

Software: ODIS-E 12.2

Hardware: VAS5054A or 6154A

Applicable vehicle models:

A3 8V 2013-2020

A4 B9 2016-2019

A5 F5 2017-2019

Q5 FY 2019-2021

Q7 4M 2016-2020

TT 8S 2014-2024

Some instrument versions are low and require firmware upgrades, such as the 15th TT, the first batch of 16-17 B9, and the 16th Q7

Pre operation: (Turn off the engine, open the hood, and connect to ODIS-E)

STG17 must not store any errors and must be deleted or fixed in advance.

Activate the lap counter:

17 Combination instrument module>Long code>Byte 01>Bit 3 Check the box

2： Steps for Brushing and Writing Sports Layout

Enter the 17 combination instrument module

Use login code 20103 to enter developer mode

Open “Special Features” and then open “Hex Service”

Enter one of the following codes:

Activate S Sports Layout (Install Rainbow Module):

3D 14 03 00 3C 09 02 01 57

Activate RS sports layout (install rainbow module):

3D 14 03 00 3C 09 02 03 57

Disable sports layout:

3D 14 03 00 3C 09 02 00 57

Activate S sports layout (without installing rainbow module):

3D 14 03 00 3C 09 01 01

Activate RS sports layout (without installing rainbow module):

3D 14 03 00 3C 09 01 03

After sending, delete the just filled in code and change it to 11 01 before sending,

Wait for the instrument panel to turn black before switching to the layout

If an error message appears, please open the hood first,

And turn on the power without starting the engine.

Repeat all content again starting from 1.