Virtual Cockpit instrument with RS Runway Layout 8W5920790 For Audi A4 S4 RS4 A5 S5 RS5 Q5 SQ5

Virtual Cockpit instrument with RS Runway Layout 8W5920790 For Audi A4 S4 RS4 A5 S5 RS5 Q5 SQ5

Upgrade your Audi with a MIB3 Virtual Cockpit featuring the RS Runway Layout.

This digital instrument cluster retrofit is designed for compatible Audi A4 B9, A5 F5 and Q5 FY models. The cluster provides the RS-style Runway instrument layout and is based on the MIB3 platform.

The available instrument cluster uses the 8W5920790 series and is supplied as a tested Virtual Cockpit instrument for retrofit applications.

RS Runway Virtual Cockpit for Audi A4, A5 and Q5

The RS Runway Layout gives the Audi Virtual Cockpit a more performance-oriented appearance, with a distinctive RS-style instrument display.

Instead of the conventional instrument layout, the Runway design provides a sportier digital dashboard experience inspired by Audi RS models.

This retrofit is suitable for owners who want to upgrade their original digital instrument cluster to an MIB3-based Virtual Cockpit with RS Runway Layout.

Compatibility Table:

For 2016-2025 Audi A4 S4 RS4
For 2017-2025 Audi A5 S5 RS5
For 2019-2025 Audi Q5 SQ5

Key Features：

MIB3 Virtual Cockpit instrument cluster
RS Runway Layout
Digital LCD instrument display
OEM-style Audi dashboard appearance
Designed for Audi A4 B9, A5 F5 and Q5 FY
8W5920790 series instrument cluster
Hardware functionally tested before shipment
Coding and component protection removal required
MIB2/MIB2P compatibility options available depending on vehicle configuration

Note1:

Note2:

1.The delivered hardware has been functionally tested!
2.Installation instructions can be provided during installation, and the vehicle needs to be coded after installation.
3.Please contact your Volkswagen Audi dealer or modder to provide ODIS,5054A, 6154A, DOIP devices and diagnostic software.

Technical specifications:

Volkswagen and Audi Parts Protection and Coding Notice:
For some Volkswagen and Audi control modules, component protection (CP) and coding need to be removed after installation.
Removing component protection (CP) and encoding involves advanced online authorization and firmware /EEPROM write procedures, which must be performed using the official factory diagnostic system.

By purchasing this product, the customer explicitly acknowledges and agrees:

1. Removing component protection (CP) and encoding poses irreversible risks.
2. Incorrect programs, software mismatch, unstable voltage, session interruption or unauthorized tools may all cause the module to fail to be recognized, resulting in communication interruption or the module being unusable.
3. The Seller shall not be held responsible for any damage, malfunction, loss of communication or failure resulting from the removal of component protection (CP), coding, programming or vehicle system adaptation by the customer or any third party (including Audi dealers, workshops, modifiers or mechanics).
4. Any malfunction that occurs after the removal of component protection (CP) and coding is regarded as third-party technical damage after delivery and does not constitute a manufacturing defect. It does not meet the conditions for return, refund or replacement.
5. Special Note: If the customer requests the seller to remotely flash data and code for product coding and to remove component protection, please contact in advance. The remote cost will be calculated separately (the seller is responsible for any damage caused by this remote flashing of data and code).