Audi VW Skoda Seat Porsche Original 360 Environment Camera Calibration Tool
ONLY CAN USE FOR Original 360 Environment Camera
It is waterproof and sunscreen, and can be washed when dirty.
– Detect the camera image on the display unit J928/J1121 the front information display and operation unit controller. If the image is affected by damage to a camera, replace the corresponding camera. If the image is tilted, check the fixation of the corresponding camera.
– The two exterior mirrors must have been folded out.
– The parking brake is tightened.
– The steering wheel is in the zero position and the wheels are straight forward.
– All doors and luggage compartment lids are closed.
– There are no people in the car.
– The vehicle is not loaded (empty weight).
– The battery charger is connected, and the battery charger must not be within the sight of the camera.
– The ignition switch is turned on.
– The system is activated and displayed on the display unit -J685- of the front information display and operation unit controller.
– Do not move the car during calibration.
– Prerequisites for calibration table/calibration environment
– Flat calibration surface
– There must be no objects in the surrounding environment of the calibration area to avoid line recognition errors.
– Uniform light (no headlights or direct lighting) to avoid strong light differences
– Position the two calibration templates in parallel. The car must be centered between the two calibration templates.
Note the following:
– Dimensions -a- 2000 to 2500 mm ± 5 mm, the front and rear are the same
– Dimensions -b- must be the same on both sides
– Dimensions -c- must be the same on both sides
Reviews
There are no reviews yet.